MULTIPIEGACRYL Mod E 1200 -2000 -3000 Heating machine for thermoplastic sheets bending
This series of machines, designed for heating thermoplastic sheet (PMMA, PVC, PS, PP, PC) is particularly suitable for bending sheets of high thickness, up to 15-20 mm. The heating occurs without contact, radiant, evenly and localized by means of sheathed tubular elements / quartz. The PIEGACRYL-MULTIPIEGACRYL MOD. E-EIR consist of a sturdy extruded aluminum carrier, on which are two guides metrics accommodation where you place the heating groups (lower and upper heating unit) and the team of reference for positioning piece. Each heating unit is constituted by a resistance to the sides of which there are two profiled half-support plate cooled water circulation (with adjustable opening symmetric 8 to 80 mm) for determining an area of localized heating and uniform on the workpiece. The ignition and adjustment of the heat (0-800 °) is independent for each unit. Possibility of uncoupling of the upper unit, and positioning in parallel with the bottom unit. Placed the sheet to be folded, stored on timer warm-up time, operate by push button or pedal start cycle (top-down heating unit with locking piece on release in automatic cycle ends), remove the softened piece and let it cool on a special template, allowing him to take the bending angle desired. On request the machine can be supplied with cooling water circulation (chiller).
SPECIFICATIONS
• Power supply 220/380volt • Pneumatically 5 Atm • Width heated zone 8-80 mm • Minimum distance between the folds 110 mm • Height adjustment of the resistors +-8mm • Power resistors 1300 watts / linear meter (approx) • Water supply to lose or closed loop (Ciller) • Team positioning piece with adjustment. metrics • Safety instructions EEC
