This series of machines, designed for heating thermoplastic sheet (PMMA, PVC, PS, PP, PC) is particularly suitable for bending plates of small thickness, up to 3 mm. The heating occurs without contact, radiant, evenly and localized by means of wire resistances. Heaters MP may be composed of: - structure in aluminum carrier, or - structure bench with base in aluminum die-bent on which accommodation are two guides metrics where you place the heating groups (2-3-4-5-6 units) and the reference square for piece positioning. Each heating unit is constituted by a profiled aluminum cooled half water circulation provided with hollow inside which is housed a resistance wire low voltage (heating zone fixed width 8.5 mm): powered to 22 V. for mod. MP 1200 and 40 V. for mod. MP 2000. The power and heat settings (0-550 °) is independent for each unit.
Placed the sheet to be folded, stored on the heating time timer (optional) operated by push button start cycle. Once softened, extract the piece and allow it to cool on a special jig, allowing him to take the bending angle desired. On request the machine can be supplied with cooling water circulation (chiller).
MULTI BENDING HEATING MACHINE Mod. MP 1200 \IR- Mod MP 2000 \IR
-ALL ALLUMINIUM FRAME
-PLASTE SUPPORT ELEMENTS WITH WATER CIRCULATION
-HEATING BY RADIATION WITH WIRE RESISTORS L.V. 22 - 40 V.
-POWER SUPPLY …………………………………………………………..220 MON
-HEATING LENGHT……………………………………….. 1230 -2030 MM
-HEATING WIDTH (FIXED) …………………………………………8,5 MM
-MAX WORKABLE THICKNESS ………………………………………………………….. 2,5- 3 MM
-MINIMUM DISTANCE BETWEEN BENDINGS……………………….…………….…… 20 MM
-MAXIMUM DISTANCE BETWEEN BENDINGS ………………………………………. 650 MM
-POWER CONSUMPTION…….....…….….……………………………………….. 550 W. MT\LIN
-SHEET POSITIONING DEVICE.… …………...........………………………… .MAX 700 MM
